What are the requirements for plastic spraying on the surface of Skip Bins?

2022-10-09 06:28:04

The reason why the Skip Bin can be pedaled is because of the lever principle. Step on the pedal at the bottom of the Skip Bin to open the lid of the Skip Bin. The operation is simple and fast, which is more convenient for people's life. When using the foot Skip Bin, we should pay attention to that the foot Skip Bin should be placed far away from the fire source to prevent the foot Skip Bin from being scorched by the fire and causing deformation. When cleaning, do not use a corrosive cleaning Skip Bin to avoid damage to the shape of the Skip Bin. If you step on the Skip Bin too hard during use, it will cause damage to the Skip Bin. Therefore, pay attention to the strength of your feet when stepping on the Skip Bin. If only you could open and close the Skip Bin with light force. When we put oily domestic waste into the Skip Bin, we need to seal it with plastic bags to prevent the Skip Bin from being stained with oil and causing inconvenience in cleaning. The materials of the foot Skip Bin in the toilet should be paid attention to. Generally, the environment in the toilet is humid, and it is easy to cause oxidation and rust of the foot Skip Bin if it is placed all year round. Therefore, it is recommended to choose a plastic Skip Bin, which is light in weight and easy to clean, will not affect people's lives, and is closer to people's lives.

The function of plastic spraying for garbage cans is to improve the ornamental quality, and to increase the anti rust ability of the garbage Container substrate. The following sections will introduce the surface spraying treatment of garbage cans in detail:

1. First, remove the oil stain, dust, rust, etc. on the surface of the Skip Bin, and create a "phosphating layer" on the surface that is corrosion resistant and can increase the adhesion of the spraying coating.

2. The electrostatic spraying machine is used to evenly spray the powder coating onto the surface of the Skip Bin.

3. Heat the powder coating on the surface to the specified temperature, and let it melt, level and solidify.

4. After electrostatic spraying, the pattern can be treated as required.