Waste Skip is now used in many places, especially in residential areas. In some places, the room style is used. This style is not very hygienic to use, because the garbage bins are mostly leftovers, etc., which are easy to put on the garbage can. Stick with grease and other dirt. Today, the editor will introduce to you what the function of the clamshell design of the trash can is:
Clamshell style products mainly include boxes and pedals. The top of the box is a triangular shape, and a garbage port is opened along the two sides of the triangle shape on the top edge of the triangle shape. And we will open a through hole at the top of the triangular shape above the box, and the garbage cover can be installed on the through hole through the rotating shaft.
The rotating shaft at one end of the garbage cover will be connected to the sprocket. The sprocket is arranged on both sides of the box. The sprocket is connected to a gear through a chain. A ratchet is installed inside the gear, and a pawl is installed in the ratchet. , the other end of the transmission rod is welded with a pedal and set with a spring.
The automatic flip device of the product can transmit data to the single-chip microcomputer chip inside the control motherboard by setting the electric push rod, control board and infrared sensor. The single-chip chip sends instructions to make the electric push rod work, and the electric push rod pushes the tooth plate to drive the shaft and The lid turns, which frees the user's hands.
By setting the inlet cover, the tension spring and a limit block, the inlet cover is turned over by the pressure of the garbage to drive the tension spring to stretch. The garbage inlet is blocked, which effectively prevents the odor of garbage from coming out.
Сэтгэгдэл
(0)